Technical Data

Product Information

RMGT Semi-Automatic Plate Changing System (Approximately 1 Minute Off/On Per Print Unit) Standard
RMGT FULL Automatic Plate Changing System (Sequential Fully Automatic Plate Changing Resulting in 3-6 Minute Plate Changing Depending on Number of Print Units) Optional
RMGT MMART Automatic Plate Changing System (Simultaneous Fully Automatic Plate Changing Resulting in 2 Minute Plate Changing Regardless of the Number of Print Units) Optional

Maximum Sheet Size:

970ST (Straight Press): 25.59” x 38” (650 mm x 965 mm)
970PF (Convertible Perfector):
- When Producing Straight Printing: 25.59” x 38” (650 mm x 965 mm)
- When Producing Perfected Printing: 25.59” x 38” (650 mm x 965 mm)

Minimum Sheet Size:

970ST (Straight Press): 11.42” x 16.14” (290 mm x 410 mm)
970PF (Convertible Perfector):
- When Producing Straight Printing: 11.42” x 16.14” (290 mm x 410 mm)
- When Producing Perfected Printing: 14.57” x 16.14” (370 mm x 410 mm)

Printing Area:
- 970ST (Straight Press): 25.2” x 36.61” (640 mm x 930 mm)
- 970PF (Convertible Perfector):
  - When Producing Straight Printing: 25.2” x 36.61” (640 mm x 930 mm)
  - When Producing Perfected Printing: 24.8” x 36.61” (630 mm x 930 mm
Paper Thickness:*
- 970ST (Straight Press): 0.0016” x 0.024” (0.04 mm – 0.6 mm), (0.8 mm heavy stock specification (Optional))
- 970PF (Convertible Perfector): 0.0016” x 0.020” (0.04 mm x 0.5 mm)
- 970PF (Convertible Perfector When Operated in Straight Mode): 0.0016” x 0.024” (0.04 X .6 mm) (Optional)
Gripper Margin: 0.39” ± 0.039” (10 mm ± 1mm)

* Printing paper thickness may vary according to paper stock.

Maximum Printing Speed

Printing Plate Dimension

Blanket Size

Pile Heights

Dimensions